Chapter 7 Tutorials
ZyWALL USG 100/200 Series User’s Guide
181
7.15.3 Configure the Backup ZyWALL
1 Connect a computer to ZyWALL B’s lan1 interface and log into its Web
Configurator. Connect ZyWALL B to the Internet and subscribe it to the same
subscription services (like content filtering and anti-virus) to which ZyWALL A is
subscribed. See Chapter 11 on page 279 for more on the subscription services.
2 In ZyWALL B click Configuration > Device HA > Active-Passive Mode. Click
lan1’s Edit icon.
3 Configure 192.168.1.5 as the Management IP and 255.255.255.0 as the
Subnet Mask. Click OK.
Figure 149 Configuration > Device HA > Active-Passive Mode > Edit: Backup
ZyWALL Example
To Next Page
Loading...
