Chapter 31 L2TP VPN
ZyWALL USG 100/200 Series User’s Guide
551
Finding Out More
• See Section 6.5.17 on page 108 for related information on these screens.
• See Chapter 8 on page 185 for an example of how to create a basic L2TP VPN
tunnel.
31.2 L2TP VPN Screen
Click Configuration > VPN > L2TP VPN to open the following screen. Use this
screen to configure the ZyWALL’s L2TP VPN settings.
Note: Disconnect any existing L2TP VPN sessions before modifying L2TP VPN
settings. The remote users must make any needed matching configuration
changes and re-establish the sessions using the new settings.
Figure 406 Configuration > VPN > L2TP VPN
The following table describes the fields in this screen.
Table 141 Configuration > VPN > IPSec VPN > VPN Connection
LABEL DESCRIPTION
Create new
Object
Use to configure any new settings objects that you need to use in this
screen.
Enable L2TP
Over IPSec
Use this field to turn the ZyWALL’s L2TP VPN function on or off.
To Next Page
Loading...
