ZyXEL Communications ZyWALL USG 100 Series - Adding a MX Record; Adding a DNS Service Control Rule

Chapter 50 System
ZyWALL USG 100/200 Series User’s Guide
828
50.5.9 Adding a MX Record
Click the Add icon in the MX Record table to add a MX record.
Figure 541 Configuration > System > DNS > MX Record Add
The following table describes the labels in this screen.
50.5.10 Adding a DNS Service Control Rule
Click the Add icon in the Service Control table to add a service control rule.
Figure 542 Configuration > System > DNS > Service Control Rule Add
Table 239 Configuration > System > DNS > MX Record Add
LABEL DESCRIPTION
Domain Name Enter the domain name where the mail is destined for.
IP Address/
FQDN
Enter the IP address or Fully-Qualified Domain Name (FQDN) of a mail
server that handles the mail for the domain specified in the field above.
OK Click OK to save your customized settings and exit this screen.
Cancel Click Cancel to exit this screen without saving