Need help?Do you have a question about the 1 Sound LCC44 and is the answer not in the manual?
General| Brand | 1 SOUND |
|---|---|
| Model | LCC44 |
| Impedance | 8 ohms |
| Power Handling | 100W RMS, 200W peak |
| Mounting | Wall mount, pole mount |
| Connectors | Speakon NL4 |
| LF Driver Size | 4" |
| HF Driver Size | 1" |
Detailed description and specifications for the TOWER LCC44 cardioid line array element.
Detailed description and specifications for the TOWER LCC84 cardioid line array element.
Specifications and overview of the SUB310 triple-10" subwoofer with Tetracoil technology.
Specifications and overview of the CSUB610 steerable subwoofer with six 10" drivers.
Specifications and overview of the CSUB210 steerable subwoofer with dual 10" woofers.
Specifications and overview of the SUB12 passive bass-reflex subwoofer with 12" driver.
Steel square-section speaker poles for mounting satellite enclosures atop subwoofers.
A shorter steel square-section speaker pole for mounting satellite enclosures.
Adapter for coupling Tower loudspeakers with Active Speaker Tubes or rigging systems.
An elegant 175 cm tall speaker stand with a round steel base for freestanding LCC44 units.
Machined structural aluminum plates for attaching Tower loudspeakers to other units or fly bars.
Square adapter for subwoofer M20 flange to mount satellite speaker enclosures.
Optional stabilizing legs for SUB310 and CSUB610 subwoofers to improve stability.
Instructions for assembling the 175 cm Active Speaker Tube and its base.
Steps for mounting the LCC44 enclosure onto the Active Speaker Tube using the Tower Tube Mount.
Installing Sub Pole Cup, Outriggers, and leveling the CSUB610 subwoofer.
Installing the Active Speaker Tube and mounting the LCC44 to the CSUB610.
Installing Sub Pole Cup, Outriggers, and leveling the SUB310 subwoofer.
Installing the Active Speaker Tube and mounting the LCC44 to the SUB310.
Installing the Sub Pole Cup on the CSUB210 subwoofer.
Installing the Active Speaker Tube and mounting the LCC44 to the CSUB210.
Installing the Sub Pole Cup on the SUB12 subwoofer.
Installing the Active Speaker Tube and mounting the LCC44 to the SUB12.
Installing rigging plates on SUB310 and LCC84/LCC44 units for stacking.
Connecting LCC44/84 units to SUB310 using the Tower Rigging System.
Mounting rigging plates and outriggers on CSUB610 for parallel configuration.
Installing rigging plates on columns and coupling them to the CSUB610.
Mounting rigging plates and outriggers on CSUB610 for perpendicular configuration.
Installing rigging plates on columns and coupling them to the CSUB610.
To Next Page