FAQ:Error & Miscellaneous Codes
11
Error & Miscellaneous Codes.
Error Codes: These may be displayed on the seven segment display.
1. “UNBI” : Probe has been unbound (unpaired) from the cooktop by the user.
2. “BAT”: Probe battery is running low during precision cooking.
3. “PROB” : No probe connection or connection was lost, cannot use Rapid, Gentle Mode or
Multi Stage Cooking when this error is present .
4. “POT”: No pot detected on the cooking surface.
Cooking Noise
Slight sounds may be produced by dierent types
of cookware. Heavier pans such as enameled
cast iron produce less noise than a lighter weight
multi-ply stainless steel pan. The size of the pan,
and the amount of contents, can also contribute to
the sound level.
A “humming” noise will be heard from the cooling
fan when it turns on to cool the induction elements;
it is normal for it to come on shortly aer the coil
turn on to cook.
You may hear a slight “Buzz” when cooking at
higher power levels, this is normal. The sound
depends on the type of pot being used. Some pots
will “Buzz” louder depending on the material. A
“Buzz” sound may be heard if the pan contents are
cold. As the pan heats, the sound will decrease. If
the power level is reduced, the sound level will go
down.
To Next Page