1byone SimpleTaste - Technical Specifications; Troubleshooting

Technical Specifications Troubleshooting
If you have problems while using your Cool mist humidifier, please refer to
this guide to help resolve the problem. If the problem persists, please
contact our customer service department at: service@1byone.com.
Power does not turn on
• The humidifier does not
work.
• The humidifier does not
blow out enough vapor.
• The vapor smells
• There is a water leak
• There is not enough water in the
water tank. Refill the water tank
• Ensure the humidifier is placed on a
level horizontal surface, and the tank
is installed correctly.
• Ensure the variable control knob is
on the correct setting.
• Ensure there is no dust or mineral
build up on the oscillator.
• Ensure the float is functioning
properly.
• If no vapor is produced, ensure the
oscillator is not damaged.
• The humidifier bowl and oscillator
may be dirty. Clean the oscillator
and bowl as per instructions.
• Change old water and replace with
fresh clean water.
• The water tank, filter cap is loose.
Please tighten.
• The water tank may not be inserted
correctly, reinsert properly.
The power cord is disconnected.
Plug in to main power supply.
Question Answer
Model name Cool mist
Rated voltage US AC120V 60Hz
Japan AC100V 50-60Hz
Europe AC 220-240V~ 50-60Hz
Power consumption 25W
Maximum jet flow 300 ml/hr
Water tank capacity 3.0 Litres
Continuous use time Approximately 10 hours at maximum
flow rate
External dimensions 200(W)× 206(D)×240(H) mm
Weight 1.05 Kg
Country of Manufacture China
EN
DE
FR
ES
JP
IT
EN
DE
FR
ES
JP
IT
11 12