8
Copy of a remote control
Guide to copy
Install the free app
Download the free “1Control” app from the app store
on your iPhone or Android smartphone.
Set a PIN code
Select your SOLO from the list on the app.
Set the PIN code to protect your SOLO.
Copy your remote control
Take the original remote control and follow the in-
app wizard.
Recognition of remote control type and processing
required is completely automated.
Make sure that the remote control is compatible with
SOLO and that it has well-charged batteries.
If you are cloning a rolling code remote, make sure
you are within 10 metres of the receiver of your gate
or garage.
It is very important to keep the remote control and
your SOLO at the right distance from one another.
Recommended distance: between 3 and 10cm
depending on the power of the remote control.
To Next Page
Loading...
