EasyManuals Logo

1st-line Q50 User Manual

Default Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #26 background imageLoading...
Page #26 background image
UNPACKING, INSTALLATION AND CONNECTION
On opening the packaging, check carefully to make sure the appliance is intact and that there are no sing
of damage. If in any doubt contact immediately your dealer that will help you in a professional way.
The packaging materials should be collected and disposed in conformity with the safety rules in force.
Keep out of the reach of children and irresponsible persons because are potential sources of danger.
If you decide not to use the appliance anymore remember to unplug it so that it cannot be used, and then
cut the cable in the point where it comes out of the appliance. Contact specialized firms for information on
the disposal of the components of the appliance.
The installation must be carried out only by professionally qualifiedpersons who are authorised to perform
such tasks and must be comply with the regulations in force in the place in which the appliance is installed
. Incorrect installation may result in injury of persons or animals, or damage to property, for which the
manufacturer cannot be held responsible.
Before using the appliance read carefully the notices and the instructions:
• The appliance must be placed on a stable, flat surface
• Not installed outside.
• Make sure that the appliance is not resting on the power supply cable.
• Make sure the voltage and frequency values of the supply mains correspond to the ratings indicated on
the label featuring the appliance’s technical data.
• Make sure the ratings of the system are suitable for the power absorbed by the appliance and/or
maximum voltage.
• It’s compulsory to earth the appliance. Check that the grounding system is in compliance with the actual
safety laws.
• The external equipotential terminal must be connected to a equipotential node.
• Three fase version: connect the motor correctly so the blade, if viewed from the grinder, rotate clockwise.
The manufacturer cannot be held responsible for any damage caused by unsuitable,
erroneous or irrational use of the machine.
The machines have been disegned and manufactured to grind coffee beans for professional
use. Any other use is to be considered unsuitable and therefore dangerous.
This machine may be used only for the purposes for which it was designed. It cannot be used
to dispense products other than coffee or any non food products.
The appliance is not to be used by children or persons with reduced physical, sensory or
mental capabilities.
Children should not play with the machine, whether they are supervised or unsupervised.
GB
26

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the 1st-line Q50 and is the answer not in the manual?

1st-line Q50 Specifications

General IconGeneral
Brand1st-line
ModelQ50
CategoryCoffee Grinder
LanguageEnglish