1UP USA QUIK RACK SINGLE User Manual

1.25” - 2” QUIK RACK SINGLE
Parts List:
1) 1.25’’ Hitch 11) Passenger Side Tray
2) Left 1.25’’ Side Plate 12) Bent Arm
3) Left Pivot Beam 13) 19” Strap
4) Cross Bar 14) Glide Bar
5) Black Bar 15) Red Lever
6) Right 1.25” Side Plate 16) 15° Plate
7) Gold Bar Knob 17) Blue Lever
8) Gold Bar 18) Driver Side Tray
9) Right Pivot Beam 19) 2” Hitch Adapter
10) Tap Plate
In The Box:
• 1UP USA Quik Rack Single
• 2 Gold Security Wrenches
• Velcro Strap
• Black ¼’’ Hex Wrench
Product Notes:
• Fits 16’’-29’’ wheels, up to 3.1’’ wide. For wider tires, use a Fat Bike Spacer Kit (sold separately).
• Rated to hold a bike up to 50 lb per bike spot.
• With the addition of two Add-Ons (sold separately), this rack can hold a maximum of three bikes.

1UP USA QUIK RACK SINGLE Specifications

General

Brand	1UP USA
Model	QUIK RACK SINGLE
Category	Automobile Accessories
Language	English

Summary

Parts List

Installation Steps

Step 1: Unpacking and Initial Setup

Remove rack from box, unfold hitch, and remove packaging materials.

Step 2: Rack Positioning

Position rack upright, rotate blue levers outward, and prepare for hitch insertion.

Step 3: Tray and Lever Adjustment

Rotate trays to loading position and ensure blue levers are locked.

Step 4: Hitch Insertion

Insert rack into receiver, ensuring minimum 2" ball insertion.

Step 5: Vertical Positioning

Pivot rack to vertical position using the black bar and tap plate.

Step 6: Securing the Rack

Tighten security bolt and attach velcro strap for added safety.

Pivoting and Rack Positions

Rack Positions Overview

Details on Storage, Extra Clearance, Load Bikes, and Rear Access positions.

Bike Loading and Unloading

Loading Bikes

Lift red lever, pull bent arm, set bike, and pivot arms to tire.

Unloading Bikes

Compress arm, lift red lever to unlock, and pivot arms away from bike.

Wheel Settings and Maintenance

Adjusting Wheel Settings

Modify spool positions for different wheel sizes using a wrench.

Additional Usage Instructions

Periodic checks, cleaning hitch receiver, and retightening hardware.