Need help?Do you have a question about the 21Energy S9x and is the answer not in the manual?
Guidance on reading and following the operating and safety instructions for future reference.
Specifies the correct environment and placement for using the Bitcoin Heater S9x.
Provides general precautions and guidelines for safe and correct operation of the fan heater.
Details on operating voltage and usability by children and persons with reduced capabilities.
Information on obtaining original spare parts and warnings against unauthorized components.
Details the manufacturer's warranty period, conditions, and claim process.
Emphasis on understanding and keeping instructions for safety and future reference.
Details the Bitcoin Heater S9x as a fan heater utilizing waste heat from Bitcoin miners.
Explains the role of 21ENERGY GmbH and product compliance with EU directives and standards.
Describes the process of cleaning and fitting new fans to used Bitcoin miners for the heater.
Provides detailed technical specifications and performance data for S9x2, S9x3, and S9x4 models.
Illustrates and labels the key components and features of the Bitcoin Heater unit.
Lists the harmonised standards and EU directives the product complies with for safety and performance.
Crucial safety warnings regarding operation environment, power, damage, and handling of the unit.
Explains safety symbols found on the product packaging and the unit itself.
Defines the meaning of various caution and note symbols used within the operating instructions.
Guidelines for safe transport, lifting, and storage conditions to prevent damage.
Step-by-step instructions for safely removing the Bitcoin Heater from its packaging.
Lists the items included in the product packaging, such as the heater, cable, and manual.
Instructions for connecting the unit to a power outlet and initial operation.
Detailed steps for connecting the Bitcoin Heater to a Wi-Fi network using a repeater.
Guides users through accessing and configuring the Antminer S9 backend for mining operations.
Explains how to find the local IP addresses of the installed Antminer S9 units.
Instructions on how to log into the Antminer S9's backend interface using its IP address.
Details on configuring the mining pool settings required for Bitcoin mining operations.
Guide on how to adjust the power consumption per miner, which controls the heating output.
Discusses fan behavior, temperature monitoring, and optimizing noise levels for the Antminer S9.
Details manual, auto, and disabled modes for fan temperature control, including warnings.
Instructions for setting a static fan speed percentage to manage cooling and noise.
Details the average mining performance (TH/s) for different S9x models at factory settings.
Explains the efficiency of Antminer S9 and how autotuning with Braiins OS+ improves it.
Guides users on how to receive mined Bitcoin by setting up withdrawals from the mining pool account.
Explains the average time to find a Bitcoin block and the implications of pool hashrate share on payouts.
Recommendations for regular checks of the unit, dust filter, and power cable for optimal operation.
Detailed procedures for cleaning the unit's housing, dust filter, and ensuring proper drying.
Information on the correct disposal method for electrical waste according to WEEE directive.
Step-by-step checks to diagnose and resolve issues when the unit is not functioning.
Identifies potential causes for loud fan operation and how to diagnose them via the miner's backend.
Troubleshooting steps for when the Bitcoin Heater is not producing warm air.
Addresses increased operational noise, often related to dust accumulation or obstructed airflow.
Critical safety advice for dealing with burnt smells, including immediate disconnection and contacting support.
To Next Page
General