Need help?Do you have a question about the 3B Medical Lumin LM3000 and is the answer not in the manual?
General| Weight | 3.5 lbs |
|---|---|
| UV-C Wavelength | 254 nm |
| Sanitization Time | 5 minutes |
| Sanitization Method | UV-C Light |
| Device Type | UV Sanitizer |
| Power Supply | AC adapter |
| Display | LED display |
Explains symbols used for equipment safety and operation.
Specifies the only authorized N95 respirator model for use with the Lumin LM3000.
Defines healthcare settings where the bioburden reduction system is intended for use.
Outlines potential benefits and risks of using bioburden-reduced N95 respirators.
Explains how much virus remains on N95 respirators after Lumin LM3000 use.
Specifies which N95 respirators are authorized for use with the Lumin LM3000.
Details measures for ensuring N95 respirators can be safely re-used.
Provides critical information and conditions for N95 respirator reuse.
Lists all necessary materials required for the bioburden reduction process.
Describes the process for collecting and transporting N95 respirators.
Outlines the steps for preparing N95 respirators before bioburden reduction.
Details the steps for bioburden reduction with the respirator's outer surface facing up.
Details the steps for bioburden reduction with the respirator's inner surface facing up.
Covers inspection, tick marking, and labeling of bioburden-reduced respirators.
Describes moving bioburden-reduced respirators to the designated ready-for-use area.
Covers initial setup, bulb replacement, and testing of the UV system.
Provides guidance on cleaning, bulb replacement, and disposal for the Lumin LM3000.
Information on how to contact 3B Medical for technical support and questions.
Guidelines for reporting discoloration, degradation, or adverse events related to the system.
Details the warranty period and procedures for warranty issues.
States compliance with FCC Part 18 rules for ISM equipment.
Warns about potential electromagnetic interference with other equipment.
To Next Page
