6
C
HAPTER
2: USB I
NSTALLATION
center of the cable line when you connect it to the cable
modem. After hand-tightening the CATV cable
connector, use the adjustable wrench to firmly tighten it.
Be careful not to over-tighten the connector or you may
damage either the connector or the cable modem. If
you plan to have the cable line connected to a television
as well as the cable modem, you will need a cable line
splitter (not included).
b Connect the USB cable line to the cable modem’s USB
port and to the USB port on the computer.
c Plug the cable modem’s power adapter into a wall outlet
or surge protector and into the cable modem’s power
jack.
Windows detects the cable modem. The Found New
Hardware screen appears.
3 When the Add New Hardware Wizard screen appears,
insert the Cable Connections CD into the computer’s
CD-ROM drive.
To Next Page
Loading...