34
C
HAPTER
3: E
THERNET
I
NSTALLATION
e Click Renew to refresh the IP address. The refreshed
address may or may not be the same as the original IP
address.
To release and renew the IP address for the
Windows 2000 operating system:
a Click Windows Start and select Programs, then
Accessories.
b Click Command Prompt.
c At the command prompt (C:\),
type
ipconfig /release
and press the Enter key
(notice that there is a space between ipconfig and
/release).
d After the system releases the IP address, at the
command prompt type
ipconfig /renew
and press the
Enter key (notice that there is a space between ipconfig
and /renew).
To Next Page
Loading...