page 40 PalmPilot Professional Handbook
To enter a user name:
1. From the Network Preferences screen, tap anywhere in the
User Name field to move the cursor to that field.
2. Use the stylus to write Graffiti
®
character strokes (or the
on-screen keyboard) to enter your user name, as shown in the
following diagram:
Type your user
name here
Note: Most dial-in servers do not accept spaces in the user name.
Entering a Password
The Password field identifies the password you use to log in to
your server or ISP. This field displays two possible settings:
Prompt (the default setting) or Assigned. If you enter a password,
your PalmPilot displays the word, “Assigned,” in this field. If you
decide not to enter a password in this field, your PalmPilot displays
the word, “Prompt,” in this field and will ask you to enter a
password during the login procedure.
Note: If you are concerned about security, you should select the
Prompt option.
To enter a password:
1. Tap anywhere in the Password field. The Password dialog
appears, as shown in the following diagram.
Enter password
Tap here
To Next Page
Loading...