RMON Configuration 355
Tab le 432 Add/Delete an Entry to/from the History Control Terminal
Adding/Deleting an Entry to/from the Extended RMON Alarm Table
You can use the command to add/delete an entry to/from the extended RMON
alarm table.
Perform the following configuration in System View.
Tab le 433 Add/Delete an Entry to/from the Extended RMON Alarm Table
Adding/Deleting an Entry to/from the Statistics Table
The RMON statistics management concerns the port usage monitoring and error
statistics when using the ports. The statistics include collision, CRC and queuing,
undersize packets or oversize packets, timeout transmission, fragments,
broadcast, multicast and unicast messages and the usage ratio of bandwidth.
You can use the following commands to add/delete an entry to/from the statistics
table.
Perform the following configuration in Ethernet Port View.
Tab le 434 Add/Delete an Entry to/from the Statistics Table
Displaying and
Debugging RMON
After the above configuration, execute the display command in all views to
display the running of the RMON configuration, and to verify the effect of the
configuration.
Tab le 435 Display and Debug RMON
Operation Command
Add an entry to the history
control terminal.
rmon history
entry-number
buckets
number
interval
sampling-interval
[ owner
text-string
]
Delete an entry from the
history control terminal.
undo rmon history
entry-number
Operation Command
Add an entry to the extended
RMON alarm table.
rmon prialarm
entry-number alarm-var
[
alarm-des
]
sampling-timer
{ delta |
absolute | changeratio } rising-threshold
threshold-value1 event-entry1
falling-threshold
threshold-value2
event-entry2
entrytype { forever | cycle
cycle-period
} [ owner text ]
Delete an entry from the
extended RMON alarm table.
undo rmon prialarm
entry-number
Operation Command
Add an entry to the statistics table rmon statistics
entry-number
[ owner
text-string
]
Delete an entry from the statistics table undo rmon statistics
entry-number
Operation Command
Display the RMON statistics display rmon statistics [
port-num
]
Display the history information of
RMON
display rmon history [
port-num
]
To Next Page