To Next PageTo Next Page
Need help?Do you have a question about the 3Com SuperStack 3 3C17204 and is the answer not in the manual?
General| Product Type | Switch |
|---|---|
| Number of Ports | 24 |
| Ports | 24 x 10/100Base-TX |
| Layer | Layer 2 |
| Switching Capacity | 8.8 Gbps |
| Manageable | Yes |
| Authentication Method | RADIUS |
| Jumbo Frame Support | Yes |
| Power Supply | Internal power supply |
| MAC Address Table Size | 8K entries |
| Features | QoS |
| Compliant Standards | IEEE 802.3, IEEE 802.3u |
Describes the SuperStack 3 Switch 4400 as a stackable Ethernet switch for high-performance workgroups.
Provides an overview of initial setup and management preparation for the Switch 4400.
Explains methods for allocating IP information, manual or automatic, for Switch management.
Guides on manually configuring the Switch's IP information via front panel or console port.
Outlines different methods for managing the Switch, including CLI, SSH, Web interface, and SNMP.
Steps to manage the Switch using CLI via a local console port connection.
Steps to manage the Switch using CLI over a network via Telnet.
Details configuration steps for SNMPv1, SNMPv2c, and SNMPv3 on the Switch.
Provides solutions for problems indicated by the Switch's LEDs, covering power and port status.
Offers solutions for rare hardware failures, such as expansion module issues or fan failures.
Addresses communication issues with the Switch, including IP configuration and router settings.
General warnings about following directions for personal safety during installation and maintenance.
Crucial safety information regarding installation, removal, earthing, and power cord sets.
Safety warning regarding fiber optic ports and avoiding looking directly at laser emissions.
