3Com SuperStack 3 3C16464C User Manual (English)

To Next Page

The SuperStack

3 Baseline 10/100 Switch is a versatile,

easy-to-use unmanaged switch. It is ideal for users who want the

high-speed performance of 10/100 switching but do not need

sophisticated management capabilities. The Baseline 10/100

Switch is shipped ready for use. No configuration is necessary.

The Baseline 10/100 Switch has 12 or 24 shielded RJ-45, 10/100

Mbps auto-negotiating ports on the front panel. Each port

automatically determines the speed and duplex mode of the

connected equipment and provides a suitable switched

connection. Each port also provides Auto MDIX.

The Baseline 10/100 Switch is suited for office use where it can

be free standing, or rack mounted (in a wiring closet or

equipment room).

The Baseline 10/100 Switch comes with:

One power cord for use with the Baseline 10/100 Switch

Four self-adhesive rubber pads

One mounting kit

The Switch can be powered either from the AC mains supply, or

through an optional 3Com SuperStack 3 Advanced Redundant

Power System (3C16071B). Contact your supplier for details.

The Baseline 10/100 Switch provides high performance switched

connections to 10 Mbps and 100 Mbps hubs, servers and

workstations that require a dedicated switched link.

The diagram below shows an example configuration:

INTRODUCTION

SuperStack

3 Baseline 10/100 Switch 12-Port (3C16464C) and

24-Port (3C16465C) User Guide

DUA1646-4AAA05

lin

Need help?

Do you have a question about the 3Com SuperStack 3 3C16464C and is the answer not in the manual?

3Com SuperStack 3 3C16464C Specifications

General