3D Factories EASY 3D MAKER - Print Is Not Good; Crunch the X or Y; Technical Support

- 14 -
VERSION: 1.9.2012
© AROJA, s.r.o. 2012
C
HECK THE NOZZLE HEIGHT ADJUSTMENT
. I
F THE NOZZLE IS TOO LOW
,
THE MATERIAL IS APPLIED INCORRECTLY
,
IT BREAKS UP INTO
THE NOZZLE AND IT BREAKS
.
T
HE NOZZLE IS TOO HIGH
. M
ATERIAL FORM ROLLER
,
COMES OUT OF THE NOZZLE AND FORMS A WAVE
.
I
DEALLY NESTLED NOZZLE ZANACHÁVÁ UNIFORM LAYER OF MATERIAL SPREAD IT INTO A THIN FLAT SHAPE
.
C
RUNCH
10.3 X
AXIS OR
Y
W
HEN PRINTING
,
THE
X
OR
Y
AXIS STUCK AND SUBSEQUENT LAYERS ARE SHIFTED
.
- S
TOP PRINTING
,
AND THEN CLEANING AND LUBRICATION
XY. T
HE JAM MAY OCCUR THAT THE AXIS OF THE DIRT NENBO LONG
TIME WAS NOT LUBRICATED AND OIL DRIED UP
.
11
TH
TECHNICAL SUPPORT
T
HE SITE WWW
.3
DFACTORIES
.
COM CAN EASILY QUERY
,
JOIN THE FORUM OR COMMUNITY
. Y
OU WILL ALSO FIND MANY HELPFUL
TIPS
,
TUTORIALS AND USER EXPERIENCE
.
D
OWNLOADS ARE ALSO MANY
3D
MODELS
.