- 3 -
VERSION: 1.9.2012
© AROJA, s.r.o. 2012
CONTENT PAGE
1. PACKAGE CONTENTS 3
2. DESCRIPTION OF PARTS 4
3. EQUIPMENT TO PRINT 4
4. MINIMUM PC REQUIREMENTS 5
5. INSTALL SOFTWARE – G3DMAKER 5
6. PRINTER CONNECTION 5
7. TURN ON - OFF MACHINE 5
8. BEFORE PRINT 6
8.1 PRINT BED 6
8.2 REMOVING OF DEBRIS 6
8.3 PRINT BAD CALIBRATION 7
8.4 CONTROL OF PRINT BED FLATNESS 9
8.5 NOZZLE CLEARING 9
9. PRINT 11
9.1 PRINT MATERIALS 11
9.2 NEW FILAMENT, CHANGE OF FILAMENT 11
9.3 PREPARE FILE FOR PRINT MANUÁL K G3DMAKER
9.4 START PRINT MANUÁL K G3DMAKER
9.5 REMOVE OBJECT FROM PRINTER
10. CLEANING AND MAINTENANCE
11. HOW TO SOLVE TROUBLE CASE
12. PRINT IS NOT GOOD
13. CRUNCH THE X OR Y
14. TECHNICAL SUPPORT
WARRANTY AND SPARE PARTS
HOW TO ORDER SPARE PARTS
DECLARATION OF CONFORMITY
1. PACKAGE CONTENTS
1x POWER SOURCE 24 V 1x 3D PRINTER
1x USB CABLE
1x CD
To Next Page
Loading...