3D Systems NextDent 5100 - Page 4

NextDent
®
5100 Setup
Please see the NextDent 5100 User Guide, found at support.3dsystems.com/nextdent-5100, for safety informa-
tion and comprehensive operating instructions.
Save all foam and packing material for future use. Shipping without the original packing material may
cause damage to the printer.
©2018 3D Systems, Inc. All rights reserved. P/N 42-D012 Rev. B
12. Select Resin Shade
1. If your resin comes in different
colors, select that color in this tab.
2. Click the Next button.
1
2
13. Select Build Style
1. Your material might have different
build styles. Keep the default build
style selected.
2. Click the Set button.
1
2
14. Initial Print Guide
Continue to the Initial Print Guide,
which is packed in with your printer.
This guide will show you how to print a
verication build.
Other Useful Documents
Please visit support.3dsystems.com/nextdent-5100
for up-to-date versions of the following documents:
NextDent 5100 User Guide - See full details
regarding safety, facility requirements, post-
processing instructions, and more for your printer.
SDS and Instructions for Use - IFUs ship with each
material. These and SDSs are also available on
https://www.3dsystems.com/materials.
3D Sprint Online Help - Launch online help by press-
ing F1 or clicking the icon while in the software.