P1000 SERVICE SOFTWARE MANUAL
4. USER INTERFACES AND FUNCTIONALITIES OF MOTOR/COMPONENT CONTROL
PANELS
The operation of the Arm control panel is the same as the motor’s one.
1. By adjusting the Resolution slide, you can set the distance covered by the unit by one click.
2. The operation of arrows is consistent with what they show.
Caution!
The arrows do not necessarily show the direction of physical movement!
X, Y, Z navigation of the Arm
Go to position defined in X,
Y, Z fields
Current position after
navigation
Mark double or single-wide
slides
FIGURE 5 ALL NAVIGATION OPTIONS OF THE ARM
To Next Page
Loading...
