P1000 SERVICE SOFTWARE MANUAL
List and functional test of Sensors
List and test the operation of Step motors
List and test Cameras, image preview
Adjust and test condenser Aperture
Adjust and test ND filter
Select Objective,
change and test Objective positions
(requires 40x objective)
Adjust the Arm and Gripper hardware limits, define and
test the Safety Z position of the Arm
Adjust and test Stage hardware limits
Adjust Slide loading unit, synchronize with other
components, define and set Stage loading position
Synchronize Objectives, Apertures and Filters
Functionalities depending on each other are
highlighted on Components pane while noninitialized
functionalities are inactive.
[RT5] megjegyzést írt: Nekem elforgatva jelenik meg.
To Next Page
Loading...
