6. Door button
6.1. The door button can be found in the right-bottom corner of P1000. The door cannot be opened until the Arm goes to Arm Safety position. For
validation, select in the drop-down menu and turn on the Turn on/off sensors button. Box zero indicates the state of the door button.
6.2. After pushing the button, the box gets cleared and activates again after clicking the Get sensor raw data button.
7. Door opening
7.1. You can test here the interlocks. Checkbox 0 indicates the state of the service interlock and checkbox 1 indicates the state of the sliding door
interlock.
To Next Page
Loading...
