3DHISTECH P1000 - Aperture High-Level Setup and Creation

P1000 SERVICE SOFTWARE MANUAL
9. APERTURE
26
SERVICE GUIDE
2. In the drop-down menu of Aperture motor, all step motors are displayed (due to a driver fault).
Caution!
Do not select another motor!
3. Click the Aperture high-level setup button.
Add/delete position
Define aperture
motors for settings
Navigates the motor to the
position selected in the drop-
down menu (if a position is
already defined)
Control panel of the
aperture motor,
activated after
motor selection