3Doodler PRO - Section 7: Troubleshooting Common Issues (Continued); Nozzle Material Leakage Fixes; Stopping Continuous Extrusion; Retrieving Unused Filament

14
If you have a spare power adapter around the house please
use it to test your 3Doodler PRO. This will help determine if the
problem is with your 3Doodler PRO or with the Power Adapter
(5v2amp) provided in the box.
NOTE:
Thin Unblocking
Tool
BLUE
Light
PRO-manual_EN_FR_Output_20170519.indd 14 19/5/2017 1:41 PM