EO Abator Operation and Installation Manual
5
General Information
Physical Dimensions
Width 900 mm (36.0 in.)
Height 800 mm (31.5 in.)
Depth 1050 mm (41.5 in.)
Suggested Service Area:
Top 900 mm (36 in.)
Left Side 500 mm (20 in.)
Right Side 500 mm (20 in.)
Front 500 mm (20 in.)
Back 100 mm (4 in.)
Heat Source 6 kW Electric Air Duct Heater
Minimum Air Flow 1.4 NCMM (50 SCFM)
Weight 163 kg (360 lbs.)
Maximum EO Feed Rate 7.7 g/min (0.017 lbs./min)
Exhaust Temperature:
Idle (“Ready”) 138ºC (280ºF)
Typical Operating (Processing EO) 238ºC (460ºF)
Upper Limit 260ºC (500ºF)
To Next Page
Loading...
