EasyManua.ls Logo

3M FAP01-RS - Warnings and Cautions; Hazardous Voltage, Fire, and Explosion Risks; Other Safety Precautions; Installation Requirements

3M FAP01-RS
4 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2
t
Warning
To reduce the risk associated with hazardous voltage:
Plug the power cord correctly and tightly into a properly rated electrical
outlet.
Do not use the Air Purier if the power cord is frayed or otherwise
damaged.
• Do not touch the power cord with wet hands.
• Disconnect electrical power before servicing the lter.
For indoor dry location use only. Do not use in an outdoor or in a wet
environment.
• Do not submerge the Air Purier in water.
• Do not modify or attempt to modify this product.
• Do not disassemble the Air Purier.
Except for lter replacement, the Air Purier is not intended
to be serviced and does not contain any serviceable replacement parts
or adjustments.
To reduce risk associated with hazardous voltage, and/or fire:
• Plug the Air Purier into a properly rated electrical outlet.
To reduce the risk associated with hazardous voltage and/or
moving blades:
Do not place ngers and/or any objects into air and/or motor housing
vents.
To reduce the risk associated with hazardous voltage, and/or fire,
and/or explosion:
Do not use any combustible or ammable items on or near the Air
Purier.
Do not spill or spray any liquids or aerosols into the Air Purier or on
the lter.
To reduce the risk associated with fire:
• Do not block any air vents during use.
• Do not place the Air Purier near a heat source.
To reduce the risk associated with various hazards:
Read and understand the operating manual before using the Air Purier.
Do not allow children or pets to have unsupervised access to this pro-
duct.
Caution
To reduce the risk associated with environmental contamination:
Dispose of the Air Purier and lters in accordance with local regula-
tions.
Replace the lter when the lter change timer begins ashing red. The
lter should be changed after no more than 90 days of continuous use.
Periodic inspection of the lter for damage or blockage is strongly re-
commended.
To reduce the risk associated with falling, and/or impact:
• Do not sit on or place any object on this product.
Location Requirements:
Select a location where the air intake and ltered air outlet are not
obstructed.
Place the Air Purier on a at, level surface at least two feet from any heat
source, such as ranges or heaters.
Do not block the air openings or place the Air Purier on a soft surface
such as a bed, chair or sofa.
• Operate indoors only.
Warning
For indoor dry location use only. Do not use outdoors or in a wet
environment.
• Do not submerge the Air Purier in water.
Do not place ngers and/or any objects into air and/or motor housing
vents.
Do not allow children or pets to have unsupervised access to this
product.
• Do not block any air vents during use.
Do not use any combustible or ammable items on or near the Air
Purier.
Do not spill or spray any liquids or aerosols into the Air Purier or on
the lter.
• Do not place the Air Purier near a heat source.
Caution
• Do not sit on or place any object on this product.
Electrical Connection:
• Plug the Air Purier into a
240 V AC wall socket
.
This plug will t into the electrical outlet. If the plug does not t the
electrical outlet, contact qualied personnel to install the proper outlet.
DO NOT TAMPER with the plug in any way.
Installation Requirements
• Plug the Air Purier into a
240 V AC wall socket
.
• Plug the power cord correctly and tightly into an electrical outlet.
• Do not use the Air Purier if the power cord is frayed or
otherwise damaged.
• Do not touch the cord with wet hands.
Wa r n i n g a n d Ca u t i o n s
in s t a l l a t i o n re q u i r e m e n t s

Related product manuals