EasyManua.ls Logo

3M Filtrete FAP-TT-ADH Series - Servicing Your Purifier; Troubleshooting

3M Filtrete FAP-TT-ADH Series
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
SERVICING YOUR PURIFIER
Cleaning the Air Purifier
• The outside of the air purier can be cleaned with a soft, dirt free, dampened cloth.
• The air inlet and outlet grills can be cleaned with a small dry, soft brush.
TROUBLESHOOTING
Where To Find Model Number
• The air purifier model number, serial number, and electrical rating
can be found on the label on the bottom on the air purifier.
Replacement Filter Does Not Fit
• Check the model number on the filter and compare it to the table on page 3.
• Make sure no foreign objects are blocking the filter opening.
• Make sure that any packaging materials have been removed from the filter.
Air Purifier Will Not Turn On
• Be sure the air purifier is properly plugged into a 120V AC outlet.
• Check if a fuse has blown or if a circuit breaker has been tripped. First check both
the home’s fuses and/or circuit breakers. If a circuit breaker has tripped or a fuse
has blown, first try to determine the root cause for the fault condition and correct
the fault condition before resetting circuit breakers or replacing fuses.

Related product manuals