How to Connect Your Device to
The 3M™ Micro Professional Projector MPro110
The 3M MPro110 can connect seamlessly to your PC or Mac® laptop or ultra mobile system, as well as PDAs, video
phones, digital and video cameras, gaming consoles and digital media players from any manufacturer.
What you will need:
• Your device
• The appropriate video cable for your specific device
• Your 3M Micro Professional Projector MPro110
• The RCA or VGA video cable that came with your 3M MPro110
Step-by-step in structions:
Step 1. Attach the manufacturer’s video cable (RCA or VGA) to your specific video device.
Step 2. Attach the 3M MPro110’s video cable (RCA or VGA) to the MPro110.
RCA Video Cable VGA Cable
Step 3a. (For RCA Connectivity) Connect the two RCA video cables together using the included RCA adapter.
Note: Similar to the supplied cable, most RCA video cables have yellow ends.
RCA Adapter
To Next Page
Need help?
General
