Need help?Do you have a question about the 3M MT73H7A4410WS6EU and is the answer not in the manual?
Introduces the 3M PELTOR WS LiteCom Plus headset and details its intended use in noisy environments.
Covers critical warnings about hearing protection, safe usage, and potential hazards like explosions.
Provides detailed cautions for battery use, environmental factors, and important notes for product maintenance and performance.
Details the CE marking, compliance with EU directives, and relevant safety standards like EN 352.
Explains the methodology and standards behind the headset's noise attenuation ratings.
Lists and describes all the individual parts and accessories included with the headset.
Provides step-by-step instructions for fitting the headset on headbands, neckbands, and helmet attachments.
Details procedures for battery replacement, charging, and turning the headset on and off.
Covers initial radio channel selection, PTT/VOX setup, and the process for pairing Bluetooth devices.
Explains how to pair new Bluetooth devices, manage connections, and reconnect previously paired devices.
Guides on managing incoming calls, ending conversations, and controlling Bluetooth audio playback.
Describes how to access and modify settings like channel, volume, and ambient listening through the main menu.
Details advanced settings accessible via sub-menus, including VOX, Squelch, language, and set-up configurations.
Covers configuration of transmission time, automatic power off, microphone gain, and input sensitivity.
Provides essential guidelines for cleaning, maintaining, and storing the headset to ensure performance and longevity.
Lists various optional accessories and replacement parts that can be used with the headset.
Outlines the warranty policy, limitations on liability, and conditions for product use and claims.
Presents detailed noise attenuation measurements for helmet attachment models based on safety standards.
Details the electrical input levels for external audio sources as per EN 352-6 standard.
Provides specific attenuation figures for helmet attachment models with foam cushions.
Lists the operational frequencies for PMR and LPD radio channels supported by the headset.
Summarizes the headset's power source, battery capabilities, and expected operating duration.
Provides key technical data on radio frequency range, operation modes, antenna type, and external interface pin assignments.
To Next Page
General