Need help?Do you have a question about the 3M PELTOR ComTac XPI MT20H682 Series and is the answer not in the manual?
Instructions for fitting the foldable headband, including cup adjustment and positioning.
Steps for fitting the neckband headset, including head strap placement.
Guide to attaching the headset to a helmet, including ventilation mode.
Switching between work mode and ventilation mode on helmet-mounted headsets.
Optimal positioning of the speech microphone for noise cancelling.
How to insert batteries and indicators for low battery levels.
Procedure for switching the headset on and off, including auto power-off.
Adjusting volume for the level-dependent function for ambient sound.
Accessing and navigating the headset's menu for various settings.
Configuring the equalizer for ambient listening sound tone.
How to reset all menu settings to factory default values.
Details on additional settings available in the advanced menu.
Adjusting release time and audio balance for the level-dependent function.
Configuring the sensitivity for external audio input signals.
Enabling or disabling warning signals like low battery alerts.
Enabling or disabling the automatic power off feature.
Information on the standard external input connector (J11).
Connecting an external microphone via the dedicated jack.
Step-by-step guide for removing and installing new ear cushions.
Instructions for cleaning cups, headband, and ear cushions properly.
To Next Page
General