Need help?Do you have a question about the 3M PELTOR ComTac VI and is the answer not in the manual?
Configure ambient listening modes for different sound profiles.
Choose between alkaline or rechargeable battery options.
Adjust wireless input and sensitivity for connected neckloops.
Adjust wired input and sensitivity for connected devices.
Set volume balance between left and right ears.
Enable or disable low battery and auto power off warnings.
Enable or disable the automatic power off function.
Select NIB frequency based on region (EU or NA/ANZ).
Reset all menu settings to factory default values.
Welcome and overview of the 3M PELTOR™ ComTac™ VI NIB Headset.
Details on the purpose and application of the hearing protection.
Key instructions and precautions for safe and effective use.
Critical safety information regarding potential hazards and misuse.
Explains the parameters and methodology of the attenuation tables.
Lists and identifies the various parts of the headset.
Step-by-step guide for fitting the headset with a headband.
Step-by-step guide for fitting the headset with a backband.
Instructions for mounting the headset to helmet ARC rails.
How to adjust helmet padding for a proper headband fit.
Guidance on positioning the speech microphone for optimal performance.
Steps for changing and replacing batteries in the headset.
Instructions for switching the headset's power state.
How to enter and use the headset's ear-plug mode.
Guide to adjusting ambient/environmental listening volume levels.
How NIB technology enables close-range communication in noisy environments.
Explains how to activate NIB via PTT or VOX modes.
Instructions for using the Push-To-Talk button for NIB transmission.
Steps to enter and navigate the headset's menu system.
Details on classic and advanced modes for ambient listening.
Addresses problems like beeping and communication failures.
Instructions for removing, cleaning, and replacing ear cushions.
Guide on applying tape to protect the speech microphone.
List of hygiene kits, cushions, microphones, and windshields.
Details on compliance with FCC and IC radio frequency regulations.
Information on 3M's warranty and limitations of liability.
Steps to unclip the rubber headband clips for conversion.
Procedure to unfold the rubber band for attachment.
Steps to detach the earcup arm guide from the right earcup.
Procedure to disconnect the boom microphone from the left earcup.
To Next Page
General