3M PELTOR ComTac VI - Headband to ARC Helmet Attachment Conversion; Detaching Headband Clips; Unfolding Rubber Band

7
1. Headband/ARC Helmet Attachment Conversion Instructions
1. From headband (1-a) to ARC helmet attachment (1-b).
(1-a) (1-b)
1.1 Unclip the rubber headband clips as shown in gure 1.1-a and 1.1-b. Pull the clip out until open. Repeat for the opposite clip.
(1.1-a) (1.1-b)
1.2 Unfold the rubber band by pulling out the ridge attachments one by one as shown in gure 1.2-a, 1.2-b and 1.2-c.
(1.2-a) (1.2-b)
EN