3M PELTOR LiteCom - 12. SPARE PARTS AND ACCESSORIES; Article number and Name; 13. STORAGE; Storage Guidelines

6
EN
12. SPARE PARTS AND ACCESSORIES
Article number Name
HY79 Hygien Kit.
Replaceable hygiene kit consisting of
two attenuation cushions, two foam
rings and two snap-in ear cushions.
HY100A Single-use protectors.
A single-use protector that is easy
to t to the ear cushions. Pack of
100 pairs.
HYM1000 Microphone protector.
Moisture-resistant and wind-resistant
hygienic tape that protects the speech
microphone and extends its life at
the same time. Pack of 4,5 meters
(14.78 feet) is sufcient for around
50 replacements.
M995/2 Wind shield for electret microphone.
Effective protection from wind noise
for electret microphone that also
protects it and extends its life.
FR08 FR08 Power supply.
Power supply for FR09/ACK053.
ACK053 Rechargeble battery.
NiMH rechargeable battery that can
replace two AA type 1.5 V standard
batteries.
FR09 Battery charger.
Charger for ACK053 batteries.
MT53N-12/1 Electret microphone.
Supplied as standard with product.
11080 SV/1 Battery lid.
13. STORAGE
• Store the product in a clean and dry area before and after
use.
• Always store the product in the original packaging and
away from any sources of direct heat or sunlight, dust
and damaging chemicals.
• Storage temperature range:
–20°C (–4°F) to 40°C (104°F).
• Relative humidity: <90%.
• Headband and Neckband versions:
Make sure that no force is applied to the headband or
neckband and that the cushions are not compressed.
• Carrier attachment version:
Ensure the earmuffs are in work mode position (see
gure D:6) and that the cushions are not compressed.
NOTE: Remove the batteries when storing the product for
long periods of time.
14. SYMBOLS
This chapter is general and explains the meaning of different
symbols that can be found on labels, packaging, and/or on
the product itself.
Symbol Description
Keep away from rain and in dry
conditions (max 85% humidity).
The maximum and minimum
temperature limits at which the
item shall be stored.
Information that relates to the
operating instructions. The
operating instructions should be
considered when operating the
device.
Caution is necessary when
operating the device. The current
situation needs operator
awareness or operator action to
avoid undesirable consequences.
The country of manufacture of
products. The “CC” shall be
replaced by the two-letter country
code CN = China, SE = Sweden
or PL = Poland (ISO 3166-1).
Date of manufacture is specied
as YYYY-MM.
The manufacturer of a product.
WEEE (Waste of Electrical and
Electronic Equipment).
The product contains electrical
and electronic components and
must not be disposed of using
standard refuse collection.
Please consult local directives for
disposal of electrical and
electronic equipment.
CC