3M PELTOR WS LiteCom Plus Quick Guide

Push
ON/OFF/Mode
three times, the
ghost voice
confirm ”Ambient
listening”
”Ambient listening”
Quick guide 3M PELTOR WS LiteCom Plus
GB
Turn heaset
on & off
Choose
channel on
the two-way
radio
Adjust the
volume on the
two-way radio
Adjust the
volume on
the ambient
listening
Push
ON/OFF/Mode
once, the ghost
voice confirm
”Channel”
Push
+ or –
to choose
channel
2 sec
Hold the
ON/OFF/Mode
button for 1 s
Hold the
ON/OFF/Mode
button for 2 s
”Power on”
”Power off”
1 sec
Push
+ or –
to adjust
radio volume
Push
ON/OFF/Mode
twice, the ghost
voice confirm
”Radio volume”
”Radio volume”
.
”Channel”
Push
+ or –
to adjust the
ambient listening
Adjust the
volume on
Bluetooth
connected cell
phone
Push
+ or –
to adjust the
Phone volume
Push
ON/OFF/Mode
until the ghost
voice confirm
”Phone volume”
”Phone volume”
Adjust the
streaming volume
on Bluetooth
connected cell
phone
Push
+ or –
to adjust the
music volume
Push
ON/OFF/Mode
until the ghost
voice confirm
”Streaming
volume”
”Streaming volume”
Adjust the
volume on
Bluetooth
connected
two-way radio
Push
+ or –
to adjust the
Bluetooth radio
volume
Push
ON/OFF/Mode until
the ghost voice
confirm ”Bluetooth
radio volume”
”Bluetooth radio
volume”

3M PELTOR WS LiteCom Plus Specifications

General

Product Type	Headset
Integrated Two-Way Radio	Yes
Sub Channels	121
Protection Level	IP54
Communication Range	Up to 2 km
Communication Technology	Digital
Microphone Type	Noise-canceling
Noise Reduction Rating (NRR)	26 dB
Charging Time	3 hours
Compatibility	Compatible with other PELTOR headsets
Standards	EN 352