To Next PageTo Next Page
Need help?Do you have a question about the 3M Speedglas 100 and is the answer not in the manual?
General| Viewing Area | 44 x 93 mm |
|---|---|
| Switching Time, Light-Dark | 0.1 ms |
| Light State | Shade 3 |
| Operating Temperature | -5°C to +55°C |
| Sensors | 2 |
| Standby Shade | Shade 3 |
| UV/IR Protection | Up to Shade 12 (permanent) |
| Battery Life | 1500 hours |
| Standards | EN379 |
| Power Source | Battery |
| Shade Range | 8-12 |
| Battery Type | Lithium 3V (replaceable) |
Crucial safety precautions and warnings for operating the welding shield.
Details product certifications, standards compliance, and filter markings.
How to activate the welding filter and how its photo sensors function.
Guide to selecting correct shade numbers and adjusting sensitivity for welding.
How to identify and respond to the low battery warning indicator.
Instructions for removing and replacing the outer protection plate.
Procedures for replacing the welding filter, inner plate, batteries, and headband.
Guidelines for product handling, storage, and sensor inspection.
Catalog of essential spare parts for the Speedglas 100 welding shield.
Lists consumable items and optional accessories for the welding shield.
Details weight, viewing area, UV/IR protection, and switching times.
Information on battery, head sizes, and shield material composition.
Table of recommended shade numbers for various welding processes and currents.
Graph illustrating light transmission and UV/IR blocking performance.
