3nStar BC1005 - Error Code & Solutions; Self-Detection Codes; E26; E27

1
Error Code & Solutions
Self-Detection Problem Reason Solution
E-26 Left Counting Sensor Page 1
E-27
Right Counting Sensor
Page 1
E-32 Speed Sensor Page 1
E-30 Stacker Sensor Page 2
E-29 Hopper/Feeding Sensor Page 2
Alarm Codes Meaning
E-17
UV Detection
Page 2
E-18 MG Detection Page 2
E-11 Double Note Detection Page 2
E-23
Chain Note Detection
Page 2
E-22 Slant Note Detection Page 2
E-15
Dimension Detection
Page 3
E-33 Half Note Detection
Page 3
E-10 Jam Detection Page 3
Self-Detection Codes
E26
1. Please check if counting sensor’s plug is well connected to the mainboard.
2. If it is well connected, please change the mainboard with the normal mainboard.
3. If the normal mainboard has been changed but is still not working, then change the left
counting sensor.
E27
1. Please check if counting sensor’s plug is well connected to mainboard.
2. If it is well connected, please change the mainboard with the normal mainboard.
3. If the normal mainboard has been changed but is still not working, then change the right
counting sensor.