3nStar RPT008 User Manual

Real-time transmission specified by the parameter n printer status

Moves the print position to the next horizontal tab position.

Prints the data in the print buffer and feeds one line based on the current line spacing.

Prints the data in the print buffer collectively and returns to standard mode.

Transmits the selected printer status specified by n in real-time, according to the following parameters:

In page mode, prints all buffered data in the printing area collectively.

Selects print mode(s) using n as follows:

Sets the distance from the beginning of the line to the position at which subsequent characters are to be printed.

Defines user-defined characters.

Selects a bit-image mode using m for the number of dots specified by nL and nH, as follows:

Clears the data in the print buffer and resets the printer mode to the mode that was in effect when the power was turned on.

Sets horizontal tab positions.

Switches from standard mode to page mode.

Selects character fonts.

Switches from page mode to standard mode.

Selects the print direction and starting position in page mode.

The horizontal starting position, vertical starting position, printing area width, and printing area height are defined as x0, y0, dx (inch), dy (inch), respectively.

Sets the print starting position based on the current position by using the horizontal or vertical motion unit.

Prints a NV bit image n using the mode specified by m.

Define the NV bit image specified by n.

Sets the absolute vertical print starting position for buffer character data in page mode.

Defines a downloaded bit image using the number of dots specified by x and y