3nStar SC100 User Manual

Introduction
This user manual is designed for use
with your laser barcode scanner. For
more detailed information, please down-
load the complete manual from our
website http://www.3nStar.com or obtain it
from your dealer.
Installation
Installing keyboard wedge scanner
1) Make sure you are using the right cable
to connect the scanner to your system.
2) Turn off the power to the system or
computer.
3) Unplug the keyboard from the system.
4) Connect Y cable to the system and the
keyboard.
5) Turn on the power to the system or
computer.
6) When indicator LED lights, and buzzer
sounds, the system is ready to scan.
Installing the RS-232 interface scanner
1) Make sure there is a power supply for the
scanner.
2) Connect the cable to the RS-232C port of
the device.
3) Make sure the host device has the correct
communication program (Xcom, program,
Hyperterminal) before transmitting data.
Installing USB interface scanner
When installing a USB interface scanner,
plug in the USB connections and Windows
will detect the unit automatically.

3nStar SC100 Specifications

General

Brand	3nStar
Model	SC100
Category	Scanner
Language	English

Summary

Introduction to SC100 Scanner

User Manual Overview

Provides an overview of the user manual and where to find detailed information.

Scanner Installation

Installing Keyboard Wedge Scanner

Steps to connect the scanner using a keyboard wedge cable to your system.

Installing USB Interface Scanner

Instructions for connecting the scanner via USB for automatic detection.

Installing RS-232 Interface Scanner

Procedure for connecting the scanner using an RS-232C port and host device.

Scanner Configuration Options

Setup Procedure

Steps to scan command barcodes for scanner configuration.

Default Settings

Overview of default settings for the scanner, indicating default options.

Scan Mode Settings

Configuration options for different scanning modes like Testing and Auto-trigger.

Interface Selection

Options for selecting the scanner's interface mode, such as AUTO or KB/USB-HID.

Terminator Settings

Settings for end-of-data characters like None, Tab, Enter, or Space.

Auto Sensor Configuration

Settings for the auto-sensor function, including ON and OFF states.

Advanced Scanner Settings

Beep Tones Configuration

Settings for scanner beep tones, including duration and volume levels.

Keyboard Mode Settings

Options for keyboard language layouts like US, French, German, English, and Turkey-Q.

RS-232 Interface Parameters

Configuration for RS-232 communication: Baud Rate, Parity, Data Bits, Stop Bits.

Handshake Protocol

Settings for communication handshake protocols like NAK ON or XON/XOFF ON.

Barcode Type Enable/Disable

Options to enable or disable specific barcode symbologies like Code 39 or UPC-A.