Need help?Do you have a question about the 3onedata IMC100-2T1F-1D and is the answer not in the manual?
General| Brand | 3onedata |
|---|---|
| Model | IMC100-2T1F-1D |
| Category | Media Converter |
| Language | English |
Lists the minimum hardware and software requirements for using the managed industrial Ethernet switches.
Details the default switch IP address and steps to configure the PC's IP for network access.
Provides step-by-step instructions for accessing and logging into the device's web-based management interface.
Explains how to view and set the device name, description, hardware, firmware, and MAC address.
Describes how to check port number, mode, link status, speed, duplex, and flow control settings.
Covers configuring port type, enablement, speed/duplex, flow control, and jumbo frame status.
Explains how to enable or disable VLAN functionality for network segmentation.
Details serial port parameter configuration and work mode setup for serial communication.
Describes how to set access rules based on IP addresses to control network access.
Explains how to set access rules based on MAC addresses to control network access.
Covers configuration of power supply and port alarms for abnormal device states.
Describes how to enable storm suppression for broadcast, multicast, and unicast traffic.
Outlines procedures for restoring factory defaults, managing configuration files, and upgrading firmware.
Details how to configure the login name and password for the web configuration interface.
Addresses common issues related to webpage display and login procedures.
Provides troubleshooting steps for issues like impassable switch ports.
Discusses reasons for power and link/act indicators not functioning correctly.
Provides information on accessing support resources and tips via the company website.
Lists the contact number for technical support to resolve product or usage issues.
Explains the procedure for product maintenance, replacement, or return.
To Next Page
