3onedata IMC100-2T1F-1D Quick Installation Guide

IMC100-2T1F-1D(3IN1)
Industrial Media Converter
Quick Installation Guide
3onedata Co., Ltd.
Address:
3/B, Zone 1, Baiwangxin High Technology
Industrial Park, Xili, Nanshan District,
Shenzhen
Website:
www.3onedata.com
Te l :
+86 0755-26702688
Fax:
+86 0755-26703485
【
Package Checklist
】
Please check whether the package and accessories are intact
while using the media converter for the first time
1. Media converter (equipped
with terminal blocks)
2.
Quick installation
guide
3. DIN-
Rail mounting
attachment
4. CD
5.
Certification
6.
Warranty card
If any of these items are damaged or lost, please contact our
company or dealers, we will solve it ASAP.
【
Product Overview
】
The product is industrial media converter. Its model is:
IMC100-2T1F-1D(3IN1) (1 100M fiber port+2 100M copper
ports+1 3IN1 serial port)
【
Panel Design
】
 Rear view, top view and bottom view
 Front view and side view
1. DIN-Rail mounting kit
2. Power supply terminal
3. Grounding screw
4. Power supply indicator
5. Running indicator
6. Port indicator
7. 100M fiber port
8. 100M copper port
9. 3IN1 serial port
10. Serial port indicator
【
Mounting Dimension
】
Unit: mm
【
DIN-Rail Mounting
】
For convenient usage in industrial environments, the product
adopts 35mm DIN-Rail mounting, mounting steps as below:
Step 1 Check if the DIN-Rail mounting kit is installed firmly.
Step 2 Insert the bottom of DIN-Rail mounting kit (one side
with spring support) into DIN-Rail, and then insert
the top into DIN-Rail.
Tips:
Insert a little to the bottom, lift upward and then insert
to the top.
Step 3 Check and confirm the product is firmly installed on
DIN-Rail, then mounting ends.
【
Disassembling DIN-Rail
】
Step 1 Device power off.
Step 2 After lift the device upward slightly, first shift out the
top of DIN-Rail mounting kit, then shift out the
bottom of DIN-Rail, disassembling ends.

3onedata IMC100-2T1F-1D Specifications

General

Brand	3onedata
Model	IMC100-2T1F-1D
Category	Media Converter
Language	English