To Next PageTo Next Page
Need help?Do you have a question about the 3R system COOLING MASTER R480 and is the answer not in the manual?
Controls for adjusting fan speed (Low, Stop, High) for front and rear fans.
Location and function of the power and reset buttons on the top panel.
Details on available fan configurations for the RAM cooling system.
Information regarding the usage limitations of 5.25" bays when installing RAM cooling.
Instructions for installing the easy-access dust filter.
Guide for installing both the dust filter and a fan.
Step-by-step instructions for installing hard disk drives.
Guidance on how to properly clean the dust filter.
Information on warranty coverage and support contacts.
Key warnings for safe operation and product usage, plus liability disclaimers.
List of included accessories and their part names.
Reference for connecting various cables to the motherboard.
Details on the Raptor-N30 adapter for 5.25" bay HDD installation.
Information on the Easy Filter for TAC2.0 cases, supporting 120mm fans.
This document outlines the features, installation procedures, and maintenance guidelines for a Cooling Master R480 PC case, designed to house and protect computer components while providing efficient cooling.
The Cooling Master R480 is a computer chassis designed to accommodate a variety of PC components, including motherboards, optical drives, hard disk drives, power supply units, and graphics cards. Its primary function is to provide a structured and protected environment for these components, ensuring their stable operation through effective cooling and secure mounting. The case features multiple fan mounts and a RAM cooling system to manage internal temperatures, crucial for component longevity and performance. It also includes front-panel connectivity options such as USB ports and audio jacks for user convenience. The design emphasizes ease of installation and maintenance, with features like removable bezels and tool-less options for certain components.
The R480 case offers several features to enhance the user experience during assembly and daily operation.
Motherboard Installation: The case provides a dedicated area for motherboard installation, complete with stand-offs and screw holes. A backplate hole simplifies the installation of CPU coolers that require access to the rear of the motherboard. Specific holes are allocated for power supply, 120mm ventilation fans, and CPU mounting, ensuring proper alignment and airflow.
Optical Drive (CD-ROM) and Power Supply Unit (PSU) Installation: The manual details a straightforward process for installing CD-ROM drives and PSUs. For optical drives, a CD-ROM cover can be removed, and the drive is inserted and secured with screws. PSU installation involves inserting the unit and fixing it with hex M3 screws, ensuring a stable power source for all components.
Long Graphics Card Installation: The R480 is designed to accommodate long graphics cards. A specific part of the internal structure can be removed to create additional space, allowing for the installation of graphics cards up to 350mm in length. This feature is particularly beneficial for users with high-performance gaming or professional graphics needs. However, removing this part may limit the use of some 3.5" drive bays.
Hard Disk Drive (HDD) Installation and Dust Filter Maintenance: The case supports the installation of HDDs, with screw-fixing mechanisms on both sides for secure mounting. A key feature is the easy-to-clean dust filter, which helps prevent dust accumulation inside the case, protecting components and maintaining optimal airflow. The dust filter can be easily removed for cleaning, contributing to the longevity of the system.
Top Panel Controls and Connectivity: The top panel of the R480 includes essential controls and connectivity options. It features front and rear fan controls (Low, Stop, High settings) for managing airflow and noise levels. USB 2.0 ports provide convenient access for peripherals, while reset and power switches offer standard system control. An HDD LED indicates drive activity, and a power LED confirms system status. A 5.25" bay cover is also present for aesthetic continuity when no optical drive is installed.
RAM Cooling System: The R480 incorporates a RAM cooling system, which can be installed using specific screws and a RAM cooling guide. This system helps to dissipate heat from the RAM modules, enhancing their stability and performance, especially during demanding tasks. It's noted that using the RAM cooling system might limit the use of 5.25" bays.
User Options and Easy Filter Installation: The case supports additional user options, including easy filter installation for side panels. These filters can be installed without screws, offering protection against dust and allowing for the installation of 120mm fans. This modularity provides flexibility for users to customize their cooling setup and maintain a clean internal environment.
Cable Management: The manual provides a comprehensive list of cables and their connectors, including power LED, HDD LED, power switch, reset switch, USB 2.0, H/D audio, fan control power, front fan, and rear fan cables. Each cable is clearly identified with its corresponding connector and a remark, often referring to the motherboard manual for proper connection, ensuring tidy and efficient cable routing.
The Cooling Master R480 is designed with maintenance in mind to ensure the longevity and optimal performance of the computer system.
Dust Filter Cleaning: One of the most significant maintenance features is the easily accessible and cleanable dust filter. The manual provides instructions on how to remove and clean the dust filter, which is crucial for preventing dust buildup inside the case. Regular cleaning of this filter helps maintain efficient airflow, prevents overheating, and extends the lifespan of internal components.
Removable Bezel: The removable bezel facilitates access to the front fan and drive bays, simplifying cleaning and component replacement. This design choice makes it easier to perform routine maintenance tasks without extensive disassembly.
General Cleaning Guidelines: The manual advises against using chemicals or wet cloths for cleaning the product surface. Instead, it recommends using appropriate cleaning methods to avoid damage to the case's finish and components. This guidance helps users maintain the aesthetic and structural integrity of the chassis over time.
Warranty and Support: The manual includes detailed warranty information and customer support contacts. It specifies that damages caused by user abuse, misuse, natural disaster, or unauthorized modifications will void the warranty. This emphasizes the importance of proper usage and maintenance to ensure eligibility for support. Users are encouraged to contact customer support via email or the company website for any issues or inquiries, ensuring that professional assistance is available when needed.
Pre-Installation Check: Before installation, users are advised to check the condition of the product and its components. This proactive measure helps identify any potential issues early, preventing complications during assembly and ensuring a smooth build process.
Environmental Recommendations: The manual provides recommendations for the optimal operating environment, advising users to keep the unit away from heat sources, direct sunlight, water, oil, and humidity. It also suggests placing the unit on a flat, leveled, solid, and well-ventilated area. Adhering to these guidelines helps prevent damage to the system and reduces the need for frequent maintenance or repairs.
By integrating these usage and maintenance features, the Cooling Master R480 aims to provide a user-friendly and durable solution for housing PC components.
General| Heatsink Material | Aluminum |
|---|---|
| Fan Dimensions | 120mm |
| Noise Level | 20 dB |
| Bearing Type | Hydraulic Bearing |
| Connector (Cooler) | 4-Pin |
