Rebuild Database
The Rebuild Database feature rebuilds the database entries for all of the footage on
the selected drives. Click the “Rebuild” button, select the drive(s) to rebuild and
click “OK” to rebuild the selected drives.
Automatically reboot
the DVR after
rebuilding the
database
Restarts the DVR after rebuilding is completed.
Warning: This action may take a lengthy period of time to complete. Do not run Vigil
Server while rebuilding the database.
Reset Initial Footage
Date
The DVR Health Monitor software uses the initial footage date in Vigil Server to
determine if the DVR is recording the proper number of days of video storage.
Click the “Reset” button to reset the cached date of the first video footage recorded
by the DVR to the oldest footage currently on the DVR.
Please refer to the DVR Health Monitor software user’s guide, or contact 3xLogic for
more information.
7.3 Data Tab
3xLogic Vigil System Server Software - User’s Guide Doc# 08100610 Page 123
To Next Page
Loading...