Need help?Do you have a question about the 4ife SV-400 and is the answer not in the manual?
Controls for power, menu access, volume, mute, and TV/Radio switching.
Visual guide for connecting the receiver to TV, aerial, dish, HDD, and amplifier.
Important safety notes on voltage and disconnecting power before making connections.
Initiating Terrestrial, Satellite, or DB Management channel searches.
Searching and installing all available terrestrial channels automatically.
Manually installing channels by specifying frequency and bandwidth.
Accessing the satellite channel search menu for finding channels from satellites.
Choosing desired satellites and confirming selection for signal reception.
Editing transponder options and configuring LNB Type, Power, and other settings.
Adding, editing, deleting, and scanning transponders for satellite channel search.
Configuring LNB Type, Power, 22KHz, and Toneburst for satellite reception.
Configuring DiSEqC 1.0, 1.1, and 1.3 for connecting multiple LNBs or switches.
Operating motorized dish using auto, continue, step, and store position functions.
Moving the dish to stored positions, original position, or user-defined coordinates.
Defining West/East movement limits, resetting reference, or disabling limits for dish.
Setting dish location via presets or manual entry of longitude and latitude.
Choosing scan modes like Default, Blind Scan, or Network for channel searches.
To Next Page
General