4smarts SMART-BONSAI-QI

Need help?

Do you have a question about the 4smarts SMART-BONSAI-QI and is the answer not in the manual?

Summary

Operation and Function Notes

Qi Charging

Place smartphone on designated area (2). LED indicator (5) shows charging status by color.

Connecting Devices (B7 Version)

Press control (8) until LED (6) blinks to enter pairing mode. Search for '4smarts B7' on smartphone.

Lamp Control (Standard)

Press control (3) for 3s to turn light on/off. Short touch cycles brightness levels.

Lamp Control (B7 Version)

Short touch control (3) for on/off. Press for 3s to activate sleep mode (30s auto-off).

Volume Control (B7 Version)

Short press '+' or '-' on volume switch (7) to adjust sound volume.

Track Control (B7 Version)

Press and hold '+' or '-' on volume switch (7) to change tracks.

Troubleshooting

Device Not Charging Properly

Ensure charging distance is within specs. Remove thick cases or objects from smartphone.

Connection Setup Issues (B7 Version)

Verify product is charged, in range, and not paired with other devices. Ensure terminal device is compatible and has active Bluetooth.

Warranty and Support Information

Warranty Terms

4smarts GmbH disclaims liability for damage from improper installation, use, or failure to follow instructions.

Disposal Notification

Dispose of electronics and batteries responsibly at designated collection points, not household waste.

Service and Support

For defective products or installation issues, contact your dealer or 4smarts via their website.

Attestation of Conformity

4smarts GmbH declares compliance with essential requirements of Directive 2014/53/EU. Consult declaration at www.4smarts.com.