INSTALLING THE
HANDLEBAR
a. Grab your 4mm Allen Key and
unscrew the 4 bolts from the stem’s
faceplate.
b. First, align the handlebar into place
on the stem.
c. Next, make sure the brake levers
on the handlebar are facing away from
the bike and that the brake cables are
crossed.
d. Finally, using your 4mm Allen Key,
loosely tighten the stem’s faceplate
so that it gently holds the handlebar
in place. (make sure the handlebar is
centered evenly across the stem. We
will fully tighten the handlebar later).
To Next Page
Loading...