WATER RESISTANT
WIRELESS SPEAKER
Model: 160499
Warnings
Battery warning!
• ”Caution” – The battery used in the product may present a risk of re
or chemical burn if mistreated. Batteries may explode if damaged.
• Only recharge your battery with the provided approved cable
designated for the product.
• Dispose of batteries according to local regulations. Please recycle
when possible. Do not dispose the battery as household waste or in
a re as it may explode.
• The battery in your product can not be removed or replaced by the
user. Any attempt to do so is unsafe and may result in damage of
the product.
Built-in Battery Care:
• Your product is powered by a rechargeable battery. Optimal
performance of a new battery is achieved only after two or three
complete charge and discharge cycles. Do not leave a fully charged
battery connected to a charger, since overcharging may shorten its
lifetime.
• If left unused, a fully charged battery will lose its charge over time.
• Leaving the product in hot or cold places, such as in a closed car in
summer or winter conditions, will reduce the capacity and lifetime
of the battery.
• Always try to keep the battery between 32°F and 113°F. A product
may not work temporarily with an extremely hot or cold battery,
even when the battery is fully charged.
Important Safety Precautions
Read all instructions before using your Wireless Speaker.
• Never expose your product to high temperatures, extreme cold or
submerse in water.
• If the product overheats, has been dropped or damaged or has been
dropped in a liquid, discontinue use.
• In order to avoid the risk of electric shock, never attempt to open
your product or repair it, consult a certied professional.
• If you detect any abnormalities when using your product
immediately discontinue use and contact the manufacturer.
• Unplug your product when it will not be in use for long periods of
time or during lightning storms.
• Never mount or store the product over any airbag deployment area,
as serious injury may result when an airbag deploys.
• Do not dispose of product in heat or re.
• Do not clean the product with harmful chemicals or detergents.
Product Overview
Power
Mode
Indicator Light/Microphone
Volume
-
/ Previous Track
Volume + / Next Track
Auxiliary Audio Input Jack
Micro-USB Charging Port
Water Resistant Cover
1
2
3
5
6
7
IPX4 water resistance rating:
Wireless speaker is protected against
splashing water for a short period of time.
Note: The wireless speaker is NOT waterproof and can not be used
while swimming, showering or submerged in water.
Bluetooth® Connection (Pairing)
Bluetooth® Connection Trouble Shooting
Why won’t the wireless speaker connect to my device?
a. The Bluetooth setting on your device may have been turned o.
Turn on the Bluetooth function and search for “
24/7 LIFE BT
Speaker”
.
b. The wireless speaker may have been connected to another device.
Disconnect (unpair) the speaker from the previous device before
connecting it to your device.
c. The wireless speaker may not have been recognized by your device.
Turn o the wireless speaker then turn it back on. Search your
Bluetooth settings on your device and connect the wireless
speaker.
d. The wireless speaker may be to far away from the device to
connect. Make sure there are no obstacles between the devices
and reconnect the wireless speaker.
1 2 3
4
5
6 7
4
Turning On/O the Wireless Speaker
Turning On: Press and hold button for 2 seconds until indicator
light ashes and you hear “Power on, wireless mode”.
Note: If you have an aux cable plugged into the auxiliary audio input
jack you will hear “Power on, audio mode”.
Turning O: Press and hold button for 2 seconds until indicator
light turns o and you hear a “Power o”.
1. Turn on the wireless speaker by pressing and holding the
button for 2 seconds until indicator light ashes and you hear
“Power on, wireless mode”.
2. Place the wireless speaker and the Bluetooth device (phone) so
that they are no further than 3ft apart.
3. Activate the Bluetooth function on your Bluetooth device. (Refer
to the manufacturer’s instruction manual to enable Bluetooth on
your device).
4. Select “24/7 LIFE BT Speaker” from the list of available Bluetooth
devices. If required enter password “0000”. If “24/7 LIFE BT
Speaker” does not appear in your device turn o the Bluetooth
function on your device then turn it back on.
5. Once paired successfully, you will hear a conrmation “Connected”
and the indicator light will be on solid.
Note 1: Once you have paired the speaker with a device, the speaker
will remember this device and will pair automatically when the
device’s Bluetooth is activated and in range.
Note 2: The speaker will attempt to automatically connect to the last
device it was paired with when switch on. If you want to pair it with
a new device, disconnect (unpair) the speaker from the previous
device and follow the steps outlined above.
Cover must be in place to
retain the speaker’s water
resistant feature.
8
8
Water Resistant
BC
To Next Page
Need help?
General