70mai Midrive OBD01 - Packing List; Installation

02
Step 1: Setting voltage and timer switches
Refer to the label on the hardwire kit box and set the low voltage
protection and time switches according to your needs.
Installation
Dip switch:
Position 1-2 for low voltage protection setting, position
3-5 for working time setting. For example, if the protection voltage
to be set is 11.6V and the working time is 12 hours, the switches
should be set to
↑↑↓↓↓
.
Always:
The hardwire kit will always work regardless of time.
Default settings:
11.9V/23.9V, 24H (After 24 hours, the hardwire kit
box will stop powering the dash cam)
70mai OBD-
Ⅱ
Hardwire Kit × 1
Adhesive sticker × 1
Packing list
User manual × 1
Low voltage protection
setting
Time setting
Voltage setting 1 2 3 4 5 Time setting
11.6V/23.6V
⬆ ⬆ ⬆ ⬆ ⬆
1 H
11.9V/23.9V
⬆ ⬇ ⬆ ⬆ ⬇
3 H
12.2V/24.2V
⬇ ⬆ ⬆ ⬇ ⬇
6 H
12.5V/24.5V
⬇ ⬇ ⬇ ⬇ ⬇
12 H
Dip switch
ON:
⬆
OFF:
⬇
⬇ ⬇ ⬆
24 H
⬇ ⬆ ⬇
Always