8BITDO N30 Pro - Instruction Manual

1.󳬞󱟿[ ]键1󶋓开󲀸⼿柄，蓝󷐡指⽰灯 。POWER 1下/󴤤闪烁
2.󳬞󱟿[ ]键3󶋓进󱮧配󲺧状态，蓝󷐡指⽰灯 。PAIR 快󸷀闪烁
3.打开Android设备蓝󵘦，󳳣󶦬[8BitdoxxPro]设备，点击连󳰚，连󳰚成功󲀀蓝󷐡指
⽰灯常󱜎。
1.󳬞󱟿[ ]键1󶋓开󲀸⼿柄，蓝󷐡指⽰灯 。POWER+X 2下/󴤤闪烁
2.󳬞󱟿[ ]键3󶋓进󱮧配󲺧状态，蓝󷐡指⽰灯 。PAIR 快󸷀闪烁
3.打开Windows设备蓝󵘦，󳳣󶦬[8BitdoxxPro(x)]设备，点击连󳰚，连󳰚成功󲀀蓝
󷐡指⽰灯常󱜎。
1. Press and hold for 1 second to power on the controller, LEDs will POWER + X blink twice per
cycle.
2. Press and hold for 3 seconds to enter pairing mode. Blue LEDs will .PAIR rapidly blink
3. Go to your Windows device’s Bluetooth setting, pair with [8Bitdo xx Pro(x)].
4. LEDs will be solid blue when connection is successful.
1. Press and hold for 1 second to power on the controller, LEDs will .POWER blink once per cycle
2. Press and hold for 3 seconds to enter pairing mode. Blue LEDs will .PAIR rapidly blink
3. Go to your Android device’s Bluetooth setting, pair with [8Bitdo xx Pro].
4. LEDs will be solid blue when connection is successful.
N30 Pro and F30 Pro
N30 Pro and F30 Pro