4.7 Place your power box to a midpoint between
the two ends of your pool and at least 3.50 m
from the edge of the pool.
4.8 Place the robot in your pool and wait until it is
completely submerged. If necessary, help it to
sink manually.
Power supply
No-Twist floating
device
7310 robot
4.9 Screw the nut of the floating cable firmly.
Press the switch on the side of the
transformer to turn it on.
A blue light appears.
4.10 Press the on/off button located above the
transformer to turn on the robot.
A red light appears.
At the end of the cleaning cycle the red light
will turn off.
EN
04 START-UP
Page 7
To Next Page
Loading...
